Solution

4x10 Stucco Embossed Aluminum Sheet

The production of stucco embossed aluminum sheet is to pass through the patterned roller after the aluminum plate is processed to get a clear pattern. This pattern is mainly for anti-skid and decoration. The common patterns include orange peel, one bar, two bar, three bar, five bar, diamond,etc.

The embossed aluminum sheet is often seen in the decoration of the linings of refrigerators, generally 0.5 mm thick. With the development of the aluminum industry, embossed aluminum plates have been habitually used in the inner support of the refrigerator, the condenser of the refrigerator, the condenser tube, etc.

stucco embossed aluminum sheet .jpg

Another popular use is bus floor. It is made of aluminum diamond plate. It is precisely because of these patterns that prevent people from slipping. When the driver takes a sudden brake in an emergency situation while driving, or when the car is going uphill or downhill, the installation of the stucco aluminum sheet from falling forward or being injured due to inertia, ensuring the safety of the passengers.

The common sizes are 5x10, 4x8 and 4x10 sheet aluminum. 5x10 aluminum sheet respectively indicate 5 foot and 10 foot, that is, 1524mm(width)x3048 mm(length). 4 x 8 aluminum sheet can also be called 4 by 8 aluminum sheet, which is 1219mm × 2438mm. 4x10 Aluminum Sheet, also called 48"x 120", is 1219 mm in width and 3048 mm in length.

At present, the pattern height of domestic aluminum tread plate is usually 0.8 mm. he pattern height of 0.8mm is enough for anti-skid use. The whole thickness of aluminum diamond plate is usually above 1mm.

5052 pattern aluminum plate is a representative product, having good corrosion resistance and rust resistance, which can be well adapted to occasions requiring high strength and high corrosion resistance. Therefore it is widely used in ships, vehicles and work platforms.

The use of advanced grinding machine equipment ensures that the work rolls on the rolling mill can be ground regularly and meticulously, so that the rolling equipment runs accurately and the surface quality of the product is improved. The 4x10 sheet aluminum produced by Haomei Aluminum is not only glossy, but also free from any visible defects.

Original source: https://www.hm-alu.com/a/4x10-stucco-embossed-aluminum-sheet.html

Tags:stucco embossed aluminum sheet   

Prev: What Is 1050 Aluminum Sheet

Next: How to Extend Service Life of Aluminum Tread Plate

Contact Us

News

Mar-28-2024
Since there are many aluminum trim coil colors, Haomei Alumi...
Mar-14-2024
The thickness of 16 gauge aluminum sheet is about 1.29mm. Ma...
Feb-27-2024
Haomei Aluminum offers different types of aluminum foil jumb...