16 Gauge Aluminum Sheet 4x8 Thickness
16 gauge aluminum thickness is about 1.29 mm, which belongs to the thin aluminum plate. Such thin aluminum sheet covers 1-8 series aluminum alloys and is of wide applications.
1050 aluminum sheet is used to make PS plates. PS plate has high requirements on the quality of aluminum plate base. The apparent quality, flatness, and thickness difference of aluminum plate base will affect the quality indicators such as the grain state of PS plate.
1100 aluminum sheets have a width of 1220mmm, 1520mm, 1550 mm, 2100mm, 2400 mm, 3000 mm,etc. In addition, the 1100 aluminum plate also provides a variety of thicknesses for customers to choose from, including 0.5mm, 1mm, 1.2mm, 1.5mm, 2mm, etc.
The anodized thin aluminum sheet is widely used for ceilings, curtain wall panels, electrical panels, furniture panels, etc. It has strong decoration, moderate hardness, and no need for complicated surface treatment. 1xxx, 5xxx and 6xxx aluminum sheets are usually chosen for anodizing.
Aluminum ceiling often chooses 3105 aluminum strip. The thickness is 0.7/1.0/1.2mm. This aluminum strip is strong and durable enough for any weather conditions. In addition, it's lightweight and easy to install. It is also easy for the architects to design a variety of trim styles.
At present, there are mainly two series of automobile aluminum sheets: 5xxx and 6xxx series. 6016 aluminum sheet with a thickness of 1.2mm is selected as the outer panel of the car body. Due to the lower elastic modulus and larger elastic deformation, its amount of springback after deformation is larger than that of steel materials. Therefore, when aluminum is used instead of steel for lightweight design and manufacturing, springback compensation and control for aluminum alloy stamping parts is very important.
The aluminum sheet thickness is linked to the price. Generally, the price of the aluminum plate with a thickness of 0.8-6.0mm is the lowest, and the price of the thinner or thicker aluminum plate will be slightly higher than this, mainly because the thinner one needs more times of rolling mill processing, while the thicker one needs hot rolling mill. Aluminum sheet 4x8 is also a popular size. Welcome to leave message below to inquire what you need.
Original source: https://www.hm-alu.com/a/16-gauge-aluminum-sheet-4x8-thickness.html